Manufacturing Industry Air Cleaners

In the manufacturing industry, air quality can be compromised by the production processes. Camfil industrial air cleaners are designed to protect your people, products and processes.

MEASURE & ANALYSE

To best understand the severity of an indoor air quality problem, measurements are often needed to be taken. For industrial air cleaners, two different air quality measurements may be needed.

Particle Concentration

A particle concentration test is a free test Camfil offers to industrial facilities. Using particle counters can highlight the high levels of concentration of different particle sizes that may be affecting people, products or processes.

Dust Analysis

Sometimes the dust/contamination source is not as obvious as it may seem. In this case, a dust analysis may be needed to ensure that any solution that is offered will meet the key deliverables of the project. The dust is sent to one of Camfil's research center laboratories for further examination.

REPORT

To best understand the findings of each measurement technique, an indoor air quality report is presented to show Camfil's findings

Air Report – Camfil utilizes our own Indoor Air Quality Measurement and Reporting software to present customers with an easy-to-read report on the air quality within their building. This can Identify the levels of particle concentrations throughout your facility and identify problem areas.

The dust analysis will identify the type of dust that is present within the facility and will help identify the source of the contamination.

SOLVE

Using the indoor air quality report, the problems that are present in a facility should be identified. Using this information, a solution will be provided. Working alongside our customer, Camfil will set key deliverables for the project before identifying any solution. This is to ensure customer satisfaction. Camfil has a full range of industrial air cleaners that can be utilized to solve factory indoor air quality problems.

SUPPORT

At Camfil, we aim to become IAQ partners and we offer support to ensure that the solution we have offer meets the key deliverables agreed to for the project. Camfil offers training for product operation as well as additional IAQ reports to ensure that the solution achieves exactly what we promise.

FAQ

To Top

Why Should I choose Camfil Industrial Air Cleaners?

Unlike many other industrial air cleaners, Camfil air cleaners utilize EN1822:2009 tested and certified HEPA filters to ensure maximum performance. Camfil has a full range of air cleaners that can be configured to suit your facility. This could be ceiling mounted where floor space is an issue.

My Air Quality decreases during specific times. can your air cleaners adapt to this?

During construction, there is an increased release of the Aspergillus into the atmosphere. Aspergillus can be deadly to high-risk, low-immune patients. During construction, all hospital windows must be sealed shut and the air must be filtered adequately in patient rooms to avoid the risk of contamination.

How often should air filters be changed?

This is completely dependent on the level of air quality needed to be achieved and the levels of dust that enter the system. When setting project deliverables, Camfil will identify the full project cost including the number of filter changes that will be needed.