Being in the manufacturing industry, you know that virtually every process creates some type of dust, mist or fume. It is important to protect employees and equipment on a day-to-day basis. Air filtration started in industrial facilities to protect the HVAC system and increase the yield in processes, thereby increasing profit dollars.
Large particles produced from machinery, fine particles consistent with any process that involves high activity in process or with people and gaseous contaminants are all problems that may be addressed with air filtration. Here we can show you how to protect your workers, equipment and processes in any facility.
Frequent pressure and short filter replacement intervals led to high operational costs. Camfil's Cam-Flo air intake pre-filters and CamGT EPA air filters met their goal of 8000 hours of life and reduced pressure drop by 50%.Manufacturing and Machinery Energy and Power Systems Case Studies
Dust is everywhere – in our homes, workplaces and the surrounding environment. One can be annoyed with the dust piled on the surface of the bookshelf but unfortunately there is a darker side; the dust can cause allergies, health problems and expensive issues in production processes and equipment.Manufacturing and Machinery Air quality
Hinkley Point C in Somerset, United Kingdom is amongst the safest and most efficient nuclear power generator that is type of a Pressurised Water Reactor (PWR). With hundreds of megawatts electrical production in planning, safety of the process becomes a key concern.
A repeal of the Clean Power Plan, lead by no less than the Environment Protection Agency (EPA) itself, could very well drive a spike in demand for commercial air filters.
Low pressure drop GTC air filters minimize filter replacement requirements, improve power output, and lower fuel consumption.
Egat North, the largest energy producer in Thailand, upgraded to Hi-Flo and CamClose air intake pre-filters as well as CamGT final EPA air filters and lowered degradation by 70%, reduced water wash requirements, and saved approximately $1.24M USD per year.
During the process of removing the four, 28 meter high boilers, a lot of environmentally harmful materials must be handled, and the demolition process will create dust and smoke, which cannot be spread outside the building.
Case Study: Clean Air For Leading Beverage Manufacturer. Air is the only ingredient involved in every aspect of food and beverage manufacturing. Air comes into contact with products from storage of goods all way to packaging. How can we help to keep your food processes safe?