GlidePack

Side-access air filter housings.

Side-access air filter housings for installation in to ductwork of HVAC systems.

Show products

GlidePack MultiTrack
- Available in 13", 21" and 32" depths.
- Replaceable fin seal polypropylene final filter gasketing to ensure a secure filter-to-track seal of less than 1% across the filter sealing surface at 3.0" w.g.
- 16-gauge aluminum double wall insulated construction with tubular framing perimeter to mate to existing HVAC equipment.
- Double wall insulated dual swing doors for filter service can be operated either left hand or right hand swing.
- The doors can also be completely removed for interference-free filter service.
- Pressure boundary integrity of housing limits the ambient leakage to less than 0.25% of rated flow at 3" w.g. and less than 0.5% of rated flow at 8" w.g.
Show products

GlidePack CamCarb Cylinder Housing
- Houses up to 96 pounds of adsorbent media per each 24"X24" opening and 2000 CFM of system capacity
- Weatherproof, 16-gauge aluminized steel with pre-drilled standing flanges to mate to existing housings or directly to HVAC equipment
- Unique bayonet mounting holding frame to minimize cylinder air bypass
- Two extruded aluminum filter slide tracks with polypropylene fin seal to ensure leak-free operation
- 2" deep track for prefilter or downstream dusting filter
- Dual-access doors with high-memory neoprene gaskets for airtight seal
- Excellent noise attenuation when matched with Camfil CamCarb cylinder filters
Show products

GlidePack CamCarb PG Housing
- Houses up to 3 cubic ft of adsorbent media per each 24" X24" opening and 2000 CFM of system capacity
- Weatherproof, 16-gauge aluminized steel with pre-drilled standing flanges to mate to existing housings or directly to HVAC equipment
- Slide track of anodized aluminum for easy panel servicing and corrosion resistance
- 4" deep track for prefilter or downstream dusting filter
- Dual-access doors with extended surface sponge gasket to assure a proper door-to-filter seal
Show products

GlidePack CamCarb VG440 Housing
- Designed for CamCarb VG440 modules
- Maximum velocity of 500 fpm (2.5 m/s)
- Only 22.75" in length of airflow
- Integrated aluminum extrusion with fin seal
- Ducted housing for supply and exhaust air systems
- Standard MOC is galvanized steel. Options include 316 SST and insulation
Show products

GlidePack CamCarb VG300 Housing
- Designed for CamCarb VG300 modules
- Maximum velocity of 250 fpm (1.25 m/s)
- Only 16.5" in length of airflow
- Integrated aluminum extrusion with fin seal
- Ducted housing for supply and exhaust air systems
- Standard MOC is galvanized steel. Options include 316 SST and insulation
Show products

ECO MoisturePack
- 16-gauge galvanized steel construction. All
- components are weatherproof for interior or
- exterior installation.
- A short in-line depth of only 12” conserving valuable space for other HVAC system components.
- Pre-drilled standing flanges to mate to
- existing HVAC equipment.
- An integral filter track for application of various impingement type filters designed for oil/water/mist removal.
- Filter track drains to facilitate liquid collection and routing to housing drain.
- A housing drain to remove captured materials for reclamation or disposal.
Show products

Sidelock
- 14-gauge galvanized steel construction with mounting flanges to mate to existing HVAC equipment. All components are weatherproof for interior or exterior installation.
- Removable, hinged, dual-access doors for filter service from either side of the unit. The doors are engineered to be square to the housing flange and include high-memory type gasketing to eliminate
- housing/ambient leakage. UV resistant sealing knobs ensure a tight seal each time the access doors are removed for filter service.
- A spring-loaded crank-type filter sealing mechanism that is capable of exerting over 700 pounds of sealing pressure against each filter to ensure a leak-free seal. Each horizontal row of filters have their own sealing mechanisms.
- A flat surface filter-to-hardware sealing edge to ensure proper gasket compression and uniformity around the sealing periphery.
- A 2” nominal size prefilter track.
- Triple static pressure ports for the facilitation of gauges to read prefilter or HEPA filter pressure drop, or a combination thereof.
Show products

DiffuserPack
- All components are weatherproof for interior or exterior installation.
- A short inline depth of only 12” conserving valuable space for other HVAC system components.
- Pre-drilled standing flanges to mate to existing HVAC equipment.
- An angled diffuser plate with 51% open area.
- The angle and open area contribute to static regain.
- At 500 feet per minute velocity, the total resistance to airflow across the unit is less than 0.10” w.g.
Show products

MagnaPack
- Constructed of all-welded 14-gauge galvanized steel (also available in 304SST)
- Withstands 8.0” w.g. positive or negative pressure without compromising the filter or
- door seals.
- Includes standing flanges for mating to HVAC housings or ductwork.
- Includes dual-access doors so filters may be serviced from either side of the housing.
- Includes a challenge injection port for absolute filter evaluation.

Need to contact us?

Get in contact

Have questions? Need information?

Product & Industry Information

(866) 422-6345

Other inquiries

(973) 616-7300

Find a contact

Select market and language

Select market and language

GlidePack

GlidePack MultiTrack

GlidePack CamCarb Cylinder Housing

GlidePack CamCarb PG Housing

GlidePack CamCarb VG440 Housing

GlidePack CamCarb VG300 Housing

ECO MoisturePack

Sidelock

DiffuserPack

MagnaPack