CamCarb CG and CM canisters are thin-bed, loose-fill filters. They provide optimum removal of moderate concentrations of molecular contamination in outdoor air, re-circulation air and exhaust air applications. CamCarb cylinders are noted for their extremely low leakage rates.
CamCarb CG and CM cylindrical filters are engineered to provide the very highest levels of performance in IAQ, Comfort and light-duty process applications, while achieving moderate pressure loss values. CamCarb cylinders utilize a high weight of adsorbent per unit airflow. CG (engineering grade plastic) cylinders are made in four different sizes, to handle different airflow ranges and CM (stainless steel) cylinders are made in the same sizes as the two largest CG cylinders. CG and CM cylinders use the same base plate to mount the filters. Each filter has three bayonet fittings on the end cap and these locate in the base plate with a simple push and turn action (like installing a lamp bulb). To ensure a very high integrity seal between the cylinder and the baseplate, each cylinder is fitted with a performance gasket. The baseplates are modular and can be assembled together to handle any airflow. The cylinders can be orientated for vertical or horizontal airflow. CamCarb CG and CM cylinders can be filled with a very wide range of activated carbon or alumina (CamPure™) medias to provide broad spectrum or targeted adsorption of contaminants, including but not limited to odors, irritants, toxic and corrosive gases. To enhance sustainability, options are available for refilling CamCarb CG and CM cylinders depending on the application details. Specific opportunities should be discussed with your local Camfil representative.