CamPulse CamBrane

The CamBrane HemiPleat is a cartridge membrane filter and an EPA air filter with non-discharging and hydrophbic properties that offer best-in-class salt and water protection for gas turbines. It offers the lowest pressure drop and helps reduce CO2 emissions per MWh. It is suitable for installations where safety/reliability is important, including corrosive/humid/wet conditions.

  • Self-cleaning cartridge filter with long filter life and low and stable pressure drop
  • Improved pulsability due to HemiPleat open-pleat media technology
  • Good pulsability with depth-loading and multi-layer media technology
  • High availability and highest reliability
  • Best fuel efficiency leads to lower CO2 emissions per MWh
  • E12 grade limits degradation such as fouling and corrosion
  • Suitable for harsh environments
  • ICON5 Low Pressure Drop
  • ICON9 en1822
  • ICON15 LCC optimized
  • ICON17 2in1
Item Type Filter Class EN1822 Airflow (m3/h) Diameter 1 (mm) Diameter 2 (mm) Length 1, Cylindrical (mm) Length 2, Cylindrical (mm) Pressure drop Initial (Pa)
CamPulse Co/Cyl E12 2500 445/324 324 660 660 180
Tenkay 34" E12 1150 324 864 165


Humid or dry heavy dust load areas, coastal and fine hydrocarbon environments
Pre- or final filter for gas turbines, large industrial air compressores, diesel & gas engines, generators & enclosures
Filter Frame
Galvanised steel, Stainless steel
Max temperature (°C)
Relative Humidity
Recommended final pressure drop
1000 Pa
Polyurethane, endless foamed, EPDM
End caps: Available in Galvanized steel (Standard), Power coated, Stainless steel AISI304, Stainless steel AISI 316
Construction with outercage and innercage also available as Cylindrical/Conical.

Articles related to Cambrane

Whitepaper: Cutting the carbon cost with improved air inlet systems 

Whitepaper: Cutting the carbon cost with improved air inlet systems 

With a growing demand for greener practices, and rising operational costs, it has become imperative that gas turbine operators cut their carbon footprints. Upgraded air intake systems are one of the easiest, most cost-effective ways to meet these demands, while improving operations at the same time.

Energy and Power Systems
Upgrade GT Filtration to Slash Carbon Emissions 

Upgrade GT Filtration to Slash Carbon Emissions 

Upgrade your gas turbine air inlet filters to cut carbon emissions per MWh produced.

Energy and Power Systems
Call Kuala Lumpur Office
+603 8023 8250
Call Penang Office
+604 642 5004
Find a contact