30/30

The 30/30 panel filter has been designed to last longer and to reduce the number of panel filter change outs. The extra filter media allows for greater dust holding capacity. The Water resistant frame helps protect the filter in moist environments

  • Water resistant cardboard frame
  • Conception with girders/crossbars
  • Diagonal stiffner stuck to media to keep the spacing of folds, protect and maintain the filter
  • Fully supported media bonded onto a wire support grid
  • Rounded pleats for a maximum capacity of dustretention and facilitate airflow through the media
  • Replaceable filter media
  • ICON7 iso16890.ai
ISO 16890 Filter Class EN779 Width (mm) Height (mm) Depth (mm) Airflow (m3/h) Pressure drop Initial (Pa)
Coarse 70% G4 289 594 48 1710 70
Coarse 70% G4 594 594 23 2600 65
Coarse 70% G4 594 594 48 3420 70
Coarse 70% G4 594 594 98 4140 90
Coarse 70% G4 394 495 48 1890 70
Coarse 70% G4 394 622 48 2340 70
Coarse 70% G4 495 495 48 2340 70
Coarse 70% G4 495 594 48 2880 70
Coarse 70% G4 289 592 98 2070 90
Coarse 70% G4 394 495 98 2250 90
Coarse 70% G4 495 495 98 2880 90
Coarse 70% G4 495 622 48 2970 70
 Pressure drop calculation tool is available

Calculate pressure drop

Choose a full-size filter module in the table above to calculate the pressure drop.
Full-size filter modules are typically 592x592mm for bag/panel filters and 610x610mm for HEPA filters.

Specifications

Application
Primary filter for air conditioning systems
Frame
Rigid water resistant cardboard
Media
Synthetic
Max temperature °C
90º C
Relative Humidity
100%
Max final pressure drop, EN 13053
Initial pressure drop + 50 Pa or initial pressure drop x3 (whichever is lower)
Dimension standard
Filter front dimensions according EN 15805
Installation options
Front and side access housings and frames are available
Max Airflow
1,25 x nominal flow
Clean Air Requirements? Contact us today!
Find a contact