CamGT 4V-300

To meet increasing demands for performance, Camfil has developed the CamGT 4V-300 turbine air intake filters. The result is a high-performing static filter that extends turbine life, decreases maintenance, and reduces carbon footprint with EPA filters. It is suitable for all installations where safety/reliability is important, including corrosive/humid/wet conditions.

  • Static air filter with long filter life and lower initial and stable pressure drop
  • Lightweight construction for easy mounting
  • Fully incinerable
  • High availability and reliability
  • Better fuel efficiency leads to lower CO2 emissions per MWh, when using EPA grades
  • Hydrophobic EPA grades limit degradation such as fouling and corrosion
  • Suitable for harsh environments
  • ICON34 gasket_01_00_10
  • ICON3 efficiency guarantee
  • ICON5 Low Pressure Drop
  • ICON7 iso16890.ai
  • ICON9 en1822
  • ICON15 LCC optimized
  • ICON54 ISO 29461 icon
Item Type ISO 29461 ISO 16890 Filter Class EN779 Filter Class EN1822 Width (mm) Height (mm) Depth (mm) Airflow (m3/h) Pressure drop Initial (Pa)
4V-300-T7-Std T7 ePM1 70% F7 592 592 300 4250 130
4V-300-T7-XL T7 ePM1 70% F7 592 592 300 4250 125
4V-300-T8 T8 ePM1 80% F8 592 592 300 4250 140
4V-300-T8-XL T8 ePM1 80% F8 592 592 300 4250 135
4V-300-T9 T9 ePM1 85% F9 592 592 300 4250 165
4V-300-T9-XL T9 ePM1 85% F9 592 592 300 4250 160
4V-300-T10 T10 E10 592 592 300 4250 200
4V-300-T11 T11 E11 592 592 300 4250 225
4V-300-T12 T12 E12 592 592 300 3400 260
4V-300-T12-CamBrane T12 E12 592 592 300
 Pressure drop calculation tool is available

Calculate pressure drop

Choose a full-size filter module in the table above to calculate the pressure drop.
Full-size filter modules are typically 592x592mm for bag/panel filters and 610x610mm for HEPA filters.

Video

Specifications

Application
All installations where safety/reliability/long life is important, especially areas with high humidity/heavy rain
Pre- or final filter for gas turbines, large industrial air compressors, diesel & gas engines, generators & enclosures, wind turbines
Filter Frame
Plastic moulded, ABS
Media
Glass fiber
Max temperature (°C)
70°C
Relative Humidity
100%
Recommended final pressure drop
600 Pa
Separator
Hot-melt
Gasket
Polyurethane, endless foamed
Grille, Downstream
Support grid for filtermedia
Sealant
Polyurethane
Installation options
In a separate bank, from the upstream or downstream sides.
Can be close-coupled in a reverse-flow configuration
Max Airflow
1,3 x nominal flow
Comment
Additional product features:
Hydrophobic filter construction and media
High filtration efficiency (up to H13)
Original vertical pleats with interrupted hot melt separator
Sealed on all sides and featuring our patented double sealing process
Resistant to turbulence and extreme pressure drop
High burst strength >6250 Pa (>25")
Solid HEPA frame eliminates air bypass
Patented aerodynamic support grid for lower pressure drop
Optimized media area for the low pressure drop at EPA efficiency
Low operational pressure drop, even when wet, with patented built-in drainage
Available in a reverse-flow configuration
XL version is available on request.
Fire rating: Available according to DIN4102 class b2 rating on request
Reverse flow version: With support metal grid available on request
Also available in 1/2 and 3/4 size on request.

Related Products

Articles related to CamGT

Gas Turbines Breathe New Life

AG Power delivers reliable power & heating to the district due to gas turbine filtration. In addition, they saved 1,100 tons of CO2 & 650,000 sM3 of fuel/year.

Case studies Energy and Power Systems
Gas Turbine Enemies Have Been Defeated

Camfil Designs a Compact Solutions on Existing Offshore Platform for Foxtrot International that Reduces Gas Turbine Maintenance

Located offshore Ivory Coast, Africa, the CamGT EPA filter solution saves Foxtrot International 3 shutdowns per year and eliminates salt corrrosion, without compromising on footprint.

Case studies Energy and Power Systems

Lng oil and gas

Air sampling, CamLab on-site analysis, as well as a Life Cycle Cost analysis show that the CamGT EPA filters will result in no shutdowns for turbine water washes, final filter shutdown extended to 5 years, decreased risk of corrosion and maximum power output.

Case studies Energy and Power Systems

Gulf of thailand oil and gas camflo camgt 3v600

Frequent pressure and short filter replacement intervals led to high operational costs. Camfil's Cam-Flo air intake pre-filters and CamGT EPA air filters met their goal of 8000 hours of life and reduced pressure drop by 50%.

Manufacturing and machinery Case studies Energy and Power Systems

Gulf coast of louisiana power generation camflo camgt

Egat North, the largest energy producer in Thailand, upgraded to Hi-Flo and CamClose air intake pre-filters as well as CamGT final EPA air filters and lowered degradation by 70%, reduced water wash requirements, and saved approximately $1.24M USD per year.

Manufacturing and machinery Case studies Energy and Power Systems

Gdf suez engie midlothian retrofit camgt 3v 600

Camfil provides the CamGT EPA air filter solution that helps reduce gas turbine compressor efficiency degradation and improves pressure drop by 40%. Three years after installation, the customer reported no filter change-outs, only 1 water wash in 3 years, and a low and stable pressure drop.

Case studies Energy and Power Systems

Pacific coast energy plant power generation camgt4v300

An energy plant on the pacific coast upgrades their Siemens 501F gas turbine filtration to the CamGT 4V-300 air intake filters after tests show its water and salt handling capabilities.

Case studies Energy and Power Systems

North power generation hiflo camclose camgt 4v300

Egat North, the largest energy producer in Thailand, upgraded to Hi-Flo and CamClose air intake pre-filters as well as CamGT final EPA air filters and lowered degradation by 70%, reduced water wash requirements, and saved approximately $1.24M USD per year.

Case studies Energy and Power Systems

CamGT

The CamGT air filter line has been turbo-boosted to maximize power, profits, and uptime of your gas turbine.

Energy and Power Systems

Cutting the carbon cost with improved air inlet systems

With a growing demand for greener practices, and rising operational costs, it has become imperative that gas turbine operators cut their carbon footprints. Upgraded air intake systems are one of the easiest, most cost-effective ways to meet these demands, while improving operations at the same time.

Energy and Power Systems

Boost to reduce

Upgrade your gas turbine air inlet filters to cut carbon emissions per MWh produced.

Energy and Power Systems

Tata power trombay retrofits their filtration system to improve corrosion, pressure drop, and diverter dampers within deadline

Tata Power Ltd, India's largest integrated power company requests Camfil for a Cam-Flo pocket bag filter and CamGT static air filter retrofit after heavy hot corrosion in the gas turbine and high pressure drop jeopardized performance and safety.

Case studies Energy and Power Systems

Dalkia power saves €172 000 / season with camfil e10 epa filters

Dalkia, a leader in the French gas turbine market, launched a national comparative test for various air intake filters, including Camfil's Hi-Flo pre-filters and CamGT EPA filters, to increase power production for their 10 GE LM6000 gas turbines.

Case studies Energy and Power Systems

Camgt 4v300

Noise complaints from neighboring communities in Thailand prompted the plants to evaluate a noise-reducing filtration system. The CamGT high efficiency air filter solution not only improved the noise levels, it also increased turbine availability, improved pressure drop and helped the gas turbine produce more power.

Case studies Energy and Power Systems

Clean Air Requirements? Contact us today!
Find a contact